• <button id="kagon"></button>
    <progress id="kagon"><tbody id="kagon"></tbody></progress>

    <div id="kagon"></div><div id="kagon"><span id="kagon"></span></div>
  • <li id="kagon"><rp id="kagon"><object id="kagon"></object></rp></li>

    logo

    Shanghai Clirik Machinery Co.,Ltd



    dhl
    dhr
    Mineral Mill
    The current position:Home > Products > Mineral Mill >

    Sandstone powder processing mill machine

    Sandstone powder processing mill machine
    Sandstone (sometimes known as arenite) is a clastic sedimentary rock composed mainly of sand-sized minerals or rock grains. Most sandstone is composed of quartz or feldspar because these are the most common minerals in the Earth's crust. Sandstone has been used for domestic construction and house wares since prehistoric times, and continues to be used.
    Sandstone should be grinded into micro powder for more applications.
    Introduce Of Sandstone powder processing mill machine
    Sandstone powder processing mill machine is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.005mm), and the capacity (ton/hour) ranges from 0.4T/H to12T/H depending on the final size and the grinding materials.
    Detailed Product Description about Sandstone powder processing mill machine
    Sandstone powder processing mill machine is mainly applied to grind non-inflammable, non-explosive and brittle materials with Mohs’ hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials. Product fineness can be controlled between 300~3000 mesh (47~5 micron) 
    Comparable with ball mill, Sandstone powder processing mill machine has features of low cost, high capacity, easy operation; Comparable with Raymond mill for coarse powder up to 325 meshes, it can produce fine powders between 47 and 5 microns (300 to 3000 meshes)
    Features of Sandstone powder processing mill machine:
    1. High efficiency
    Under the same final size and power, the product capacity of Sandstone powder processing mill machine is twice than jet mill and agitation mill.
    2. Longer lifetime of spare parts
    The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
    3. High safety and reliability:
    There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
    4. High fineness of products
    The product fineness can reach D97≤5μm.
    5. Environment friendly
    The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
    Production Line Configuration of Sandstone powder processing mill machine:
    The whole set HGM Sandstone powder processing mill machine consists of  hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems
     Working Principle of Sandstone powder processing mill machine:
    The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse powder return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
    Model and technical data of Sandstone powder processing mill machine:
    Releated product
    Online Message

    Message

    Name:
    E-mail:
    tel:
    Message:
    Product Center
    Hot News
    Contact US
    Address:No.19Fuqing Rd,Shanghai
    Tel:0086-21- 58975587
    0086-21- 20236178
    Fax: 0086-21- 58974855
    Postcode: 201201
    E-mail:sales@clirik.comcontact
    ? 久久r热